No results were found for the filter!
HF Analyser HF32D
for an easy evaluation of the HF exposure
Proven ten thousandfold worldwide: Even this most economical device meets the high quality standards of the entire series The measured values in the relevant frequency range are displayed reliably and directly in the unit of the...
Frequency Range: 800 MHz - 2.7 GHz
HF Analyser HF35C
for an easy HF evaluation, more sensitive and incl. audio analysis
On top of the features of the HF32D it offers: With the audio analysis of the HF35C, even technical laypersons without electronic expertise can distinguish between most radiation sources such as mobiles, WiFi, smart meters, radar, etc....
Frequency Range: 800 MHz - 2.7 GHz
HF Analyser Kit HFE35C
easy and comprehensive! Incl. UBB27.
Kit offer including the following components: HFE35C-basic with an extended frequency range reaching down to 27 MHz. (Important: The "normal" HF35C cannot be upgraded for use with the UBB27!) Two antennas: The especially compensated...
Frequency Range: 27 MHz - above 2.7 GHz
HF Analyser HFW35C
extends the range of analysis up to 6 GHz
Functionality and equipment similar to the HF35C, however: Frequency range from 2.4 to 6 GHz. Especially designed for the analysis of radiation caused by wireless equipment / PC networks (WLAN/WiFi, Bluetooth). Also covers the recently...
Frequency Range: 2.4 - 6.0 GHz
Ultra Broadband HF Analyser Kit HFEW35C
comprehensive and future-proof for EHS - "5G ready"
Based on the proven HF analyzers HFE35C AND HFW35C: Covers all cellular services (GSM, UMTS, LTE, 2G, 3G, 4G, 5G (all sub-6 GHz bands)), as well as DECT, both WLAN/WiFi bands, WiMAX and radio, TV, TETRA/BOS and multiple radar...
Frequency Range: 27 MHz to 6 GHz
HF Analyser HF38B
Professional functions easy to operate
Includes all functions of the HF35C as well as important functions of the professional meters: Optimized LogPer antenna with higher accuracy, especially at the critical lower and upper end of the frequency range. Includes all mobile...
Frequency Range: 700 MHz - 2.7 GHz (3.3 GHz...
HF Analyser Kit HF38B-W
Professional features - easy to operate > extended up to 6 GHz | "5G ready"
Set of HF38B and HFW35C: Highest sensitivity and broad frequency response Includes all 5G frequencies ("Sub-6-GHz" bands). Furthermore all other mobile services (GSM, UMTS, LTE, 2G, 3G, 4G) as well as DECT, both WLAN/WiFi bands, WiMAX...
Frequency Range: 700 MHz - 6 GHz
HF Analyser HF59B
Professional technology for building biology measurement technicians
Its focus lies on the professional HF analysis and remediation methods: Self-compensating, optimized log.-per. antenna from 700 MHz to 3.3 GHz with higher accuracy, especially at the critical lower and upper end of the frequency range....
Frequency Range: A frequency range of down...
HF Analyser Kit HFE59B
Our top device fully equipped with two antennas, preamplifier, etc.
Established worldwide as THE benchmark for broadband RF measurement technology for committed building biologists: The extra broad frequency range amongst others comprises cell phone services such as GSM (2G), UMTS/CDMA (3G), LTE (4G),...
Frequency Range: 27 MHz to more than 3.3 GHz
HF Analyser HFW59D
The only fully compensated HF-Analyser up to 10 GHz
Reliable addition to the HF59B for the upper frequency range: FULL 10 GHz, fully compensated. This unique broadband HF meter allows unfalsified measurements of the frequently used radar frequencies between 8.5 and 9.5 GHz (air traffic...
Frequency Range: 2.4 - 10.0 GHz
HF Analyser Kit HFW59D plus
Fully compensated up to 10 GHz, incl. preamplifier and omnidirectional antenna
Worldwide unmatched sensitivity at 10 GHz combined with the proven analysis capabilities of the Gigahertz professional equipment In addition to the LogPer antenna included in the standard scope of the device, it also includes the 360°...
Frequency Range: 2.4 - 10.0 GHz
Ultra Broadband HF Analyser Kit HFEW59BD plus
27 MHz - 10 GHz: fully equipped for a broad HF analysis
Based on the professional HF analysers HFE59B and HFW59Dplus with the respective accessories. The extra broad frequency range comprises cell phone services such as GSM (2G), UMTS/CDMA (3G), LTE (4G), 5G (wide area bands), wireless...
Frequency Range: 27 MHz to 10 GHz
Service-specific frequency filter FF10
Suitable for all HF analysers
Unmatched: The 40-60 dB suppression of unwanted frequencies as well as the 20-30 dB suppression for the technically very difficult separation between GSM/LTE1800 and DECT. To be connected between the antenna cable and the antenna entry...
Frequency Range: (Here: filter positions)...
Attenuator DG20
suitable for: HF32D, HF35C, HF38B
For measuring higher levels of high-frequency EMR/RF: Power flux densities ("field strengths") up to 200,000 µW/m² corresponding to 200 mW/m² with the HF32D and HF35C. Power flux densities ("field strengths") up to 2,000,000 µW/m²...
Attenuator with DC-Bypass DG20_G10
suitable for: all HF5xx as well as all E- and W-types
For the measurement of higher levels of high-frequency EMR/RF: Power flux densities ("field strengths") up to 200,000 µW/m² corresponding to 200 mW/m² with the HFE35C and the HFW35C. Power flux densities ("field strengths") up to...
High-pass filter HP700
suitable for: HFE35C, HF59B, HFE59B
This filter helps suppress the lower frequencies. It reaches an attenuation of more than 50 dB (= factor 100,000) below 600 MHz. All Gigahertz analysers specified above 800 MHz already come with a similar filter integrated in the basic...
RF-preamplifier HV10_27G3
suitable for: HF59B, HFE59B
Future-proof: Comprises the full frequency range of the HF59B. In order to avoid measurement errors due to intermodulations, a high pass filter matching to the antenna (such as the HP800) should be applied when measuring with the...
RF-preamplifier HV20_2400G10
suitable for HFW35C and HFW59D
High frequency preamplifier for the evaluation of low field strengths.
Highpass filter 3.3 GHz HP33
suitable for: HFW35C, HFW59D
No DC pass, so it is not possible to use this filter with an active antenna such as UBB! The LEDs of the LogPer antenna are not powered either, but this has no impact on the measurement.
Frequency Range: 3.3 GHz - >10 GHz
Bandpass filter 5-6 GHz (upper WLAN/Wifi band) BP56
suitable for: HFW35C, HFW59D
No DC pass so it is not possible to use this filter with an active antenna such as UBB! The LEDs of the LogPer antenna are not powered either, but this has no impact on the measurement.
Frequency Range: 5 GHz - 6 GHz
Ultra broadband antenna for RF-Analysers UBB27_G3
suitable for: HFE35C, HF59B, HFE59B
From 27 MHz to beyond 3.3 GHz*: For the measurement of the primary high frequency ranges: CB and amateur radio, directional radio, TV and radio (digital and analogue), TETRA, GSM, radar, DECT, UMTS, WLAN, and more. "Overall...
Frequency Range: 27 MHz to beyond 3.3 GHz.
Omnidirectional Antenna UBB2410
Revision 2.0 - Suitable for: HFW35C, HFW59D
Horizontally-isotropic 360°-reception pattern - fundamental for long-term measurement recordings Advantageous especially for the identification of radar signals with an unknown location of the transmitter For both wireless LAN bands,...
Frequency Range: 2.4 GHz - 10 GHz
700 MHz LogPer-Antenne HF38B LS733
Upgrade für das neue untere LTE- und 5G-Band
Verbesserte Neuentwicklung: Ersetzt die bis zum Frühjahr 2018 im Lieferumfang des HF38B befindliche 800 MHz Antenne. Bei der aktuellen Version des HF38B ist die 700 MHz-Antenne bereits im Lieferumfang. Erweitert den messbaren...
Frequency Range: 700 MHz bis 2,7 GHz (3,3...
700 MHz LogPer Antenna for HF59B LSK733
Upgrade for the new lower LTE- and 5G-band | Fully compensated
Enhanced new development: Replaces the 800 MHz antenna previously supplied with the HF59B. The current version of the HF59B is already supplied with the 700 MHz antenna. Enhanced linearity of frequency response! Extends the measurable...
Frequency Range: 700 MHz to 2.7 GHz (3.3...
Silicon holster (protective sheath) black HOL2
Perfect protection for your valuable meter
for 3D LF and HF series colour: black (delivery without measuring device)
Direct Mounting UBB27 on FF10 UF1
Factory Modification for Two-Hand-Control
This modification allows you to hold the meter in one hand and to easily read the displayed values, while the antenna and the filter can be panned with the other hand.
LF Analyser ME3030B
Reliable EMF evaluation for your home
Even this starter device meets the high quality standards and common advantages of whole series: The reading shows the total pollution directly in the entity corresponding to the building biology standard values - without any...
Frequency Range: 16 Hz - 2 KHz (compensated,...
LF Analyser ME3830B
unlocks the 100 kHz as specified by SBM
Comprises all features of the ME3030B, and additionally offers: Comprises the full frequency response required by the standard of building biology: 16 Hz to 100 kHz. And it is - unique in this price range - fully compensated up to 100...
Frequency Range: 16 Hz - 100 KHz...
LF Analyser ME3840B
The link between amateur and professional instruments
On top of all features of the ME3830B, it offers: The switchable internal filter module is included as in the professional devices. This allows for a numeric differentiation of the different sources of EMF pollution like Dirty Power,...
Frequency Range: 5 Hz - 100 KHz...
LF Analyser ME3851A
compact and professional
It’s the professional features that differentiate the ME3851A from the ME3840B Very important: It is more sensitive by a factor of 10 (smallest display resolution: 0.1 nT / 0.1 V/m). In conjunction with the frequency filter even the...
Frequency Range: 5 Hz - 100 KHz...
LF Analyser ME3951A
compact and professional
Main difference to the ME3851A: The frequency response is extended to the full 400 kHz, as specified in the TCO directive. This is an important decision criterion, if you offer professional LF measurements, because ... modern switching...
Frequency Range: 5 Hz - 400 KHz...
3D-LF-Analyser with Data Logger NFA1000
established as “Gold Standard” for EMF professionals
The NFA1000 supports EMF professionals with dedicated innovative features THREE-dimensional potential-free measurement of the electric field - without the necessity of an external cubicle sensor (thanks to our patents DE102008045360 and...
Frequency Range: 5 Hz to 1000 KHz...
3D-LF-Analyser with Data Logger NFA400
for an in-depth EMF analysis
In addition to the three-dimensional magnetic field measurement with its compact internal sensor, the NFA400 features the following: The frequency response is extended from 5 Hz up to 400 kHz (TCO). ONE-dimensional potential-free...
Frequency Range: 5 Hz to 400 kHz...
3D-Magnetic Field Data Logger NFA30M
for comprehensive long-term analysis of the magnetic field
Revolutionizes the significance of long-term magnetic field recordings: Parallel to the true 3D value of the magnetic field in the entire frequency range, the three axes of the field, railway and mains current as well as natural and...
Frequency Range: 16 Hz to 32 KHz (compensated)
Allows measurement of the electrostatic charge of, for instance, monitors, carpetings, curtains, etc.. These electrostatic charges have a significant influence on the room air quality (air ionization) and are therefore an important...
Frequency Range: 0 Hz
Including hand electrode and grounding cable. Suitable for measurements of the capacitive body voltage following the standard guidelines of the buiding biology measurement technology (SBM). A useful supplement for field strength...
To control the appropriate phase connections of electric appliances.
Mounting Aid (ME) PM5
for building a potential free rod
A potential free rod allows for a simple and quick POTENTIAL FREE measurement of electric alternating fields. Can easily be mounted potential free to a wooden rod (e.g. a broomstick, not included!). Made of non-conductive material...
Floating potential equipment holder (NFA) PM1
For a secure placement of your meter
For a potential-free measurement without connection to ground potential Made of FR4 material For the ME or the NFA series Usable with or without holster The display remains clearly visible
Mounting Aid (NFA) PM5s
for building a potential free rod
A potential free rod allows for a simple and quick POTENTIAL FREE measurement of electric alternating fields. Can easily be mounted with the four screws included in delivery onto any wooden rod (preferably hard wood such as beech tree,...
PC Software NFAsoft
for the NFA series
Revolutionizes the evaluation of individual measurements and long term recordings. Included in the NFA scope of supply. No installation required. Can be run with all systems as of Windows 98, with Linux, and with MAC. The software is...
TCO-compliant probe for the NFA series (NFA) TCO3
Suitable for NFA400 and NFA1000
Ideal for the measurement of low exposure electrical installations. Automatic recognition by the NFA400/NFA1000 Allows for E-field measurements againt ground potential, also in areas of difficult access, without the distorting...
Electrostatic Sensor ES-NFA
Designed to be connected to the NFA400/1000
Features: For a measurement of the electrostatic charging of surfaces. A useful aid when choosing material conducive to the indoor environment, such as carpets, curtains, or others For a measurement and control of electrostatic...
Frequency Range: 0 Hz
3D-Magnetostatic Sensor MS3-NFA
Designed to be connected to the NFA400/1000
Features: High-precision one-dimensional measurement of constant magnetic fields Resolution of only 10 nT (therefore even the smallest geomagnetic anomalies can be identified) Switch to select between absolute and relative measurements...
Frequency Range: 0 Hz
Accessory Kit Body Voltage NFA1000/400
Certificate of Calibration KAL-NFA30M
issued specifically for each meter upon request immediately prior to delivery!
For the frequency range from 16 Hz to 32 kHz with detailed calibration protocol. A calibraton certificate required after the purchase of the meter can only be issued after a qualitative functional test of the meter and is subject to an...
Certificate of Calibration KAL-NFA400/1000
issued specifically for each meter upon request immediately prior to delivery!
For the frequencies from 5 Hz to 400 kHz with detailed calibration protocol. Why only up to 400 kHz? Just like the accredited calibration laboratory which does the reference calibrations of the NFA1000 for us, we reach physical limits...
Connecting Cable HF-Analyser to NFA KAB0053
For the connection of an HF analyser to the NFA1000/400/30M
Cable 2.5 mm mono jack to 2.5 mono jack Length 2.0 m Colour black
Suppression Kit DIY EDY
For signal cables
This kit consists of two ferrite beads which are to be mounted onto the two ends of the cable as shown on the picture, and fixed with the also provided cable straps. An average interference suppression of a factor 100 can be expected....
Battery connecting cable BAK_U
suitable for the HFE59B and the NFA-line
For off-grid, extra-long recordings with any 12V gel- or AGM-battery The cable configuration includes two 20 cm long cables with small crocodile clips for contacting the battery poles, adapted to a suitable plug for our DC socket. Along...
Frequency Separation AC/DC Input FA1
for an in-depth analyisis of Dirty Power
Firmware Activation NFA. Enables long-term recordings of the output signal of an adequate current clamp (for instance CA Miniflex MA200), the TCO probe TCO3 as well as the hand electrode AK2 in the significant frequency categories of...
Silicon holster (protective sheath) yellow (NFA) HOL1
Perfect protection for your valuable meter
for 3D-LF and HF series colour: yellow (delivery without measuring device)
Electrosmog measuring kit MK10
Our most economical solution for the high AND the low frequency
Consisting of the HF32D and the ME3030B Even the two most low priced meters display the measured values reliably and directly in the respective units of the building biology precautionary values - without any calculations being...
Electrosmog measuring kit MK20
Our best-selling measuring case
Proven thousands of times worldwide: HF35C and ME3830B. Advantages compared to the "smaller" MK10: The 10fold higher sensitivity of the HF35C together with the LogPer directional antenna is very useful for small or hidden sources -...
Electrosmog measuring kit MK20-W
MK20 with extended frequency range (6GHz)
HF35C, HFW35C and ME3830B. Advantages versus the “smaller” kit MK 10: The 10x higher sensitivity of the HF35C and HFW35C, together with the LogPer DF antenna, pays off when searching for small or hidden sources - especially important...
Electrosmog measuring kit MK25-EW
„All-encompassing“: in-depth analysis incl. dirty power and "5G ready“
HFE35C, HFW35C and ME3840B: Nothing overlooked even without technical knowledge In addition to the MK20-W's frequency range, which has already been extended upwards, it also covers the 5G band at 700 MHz, TETRA, as well as radio and...
Electrosmog measuring kit MK30
The link between "lay" and professional equipment.
HF38B and ME3840B. Advantages compared to the "smaller" MK20: The HF38B includes the antenna of the professional devices and can therefore also reliably measure the crucial 5G frequencies. In addition, it has the very high resolution...
Electrosmog measuring kit MK30-W
Professional features - easy to operate > upgrade to 6 GHz | "5G ready"
HF38B, HFW35C und ME3840B: Higher RF sensitivity and deeper analysis of dirty power: The HFW35C completes the MK30 in terms of the increasingly higher frequencies used for mobile radio and WiFi. Digital display of 0.1 µW/m² up to 1999...
Electrosmog Measuring Kit "Profi" MK70-3D
Our top equipment for committed building biologists
NFA1000 and HFE59B with their complete accessories. Here are the most important highlights: The UBB27 isotropic ("omni") antenna which comes with the HFE59B helps detect the locally very narrow maximas (especially indoors), which are...
Electrosmog Measuring Kit "Profi" MK70-EW
From 5 Hz to 10 GHz - comprehensively analyzed with our three top devices
HFE59B, HFW59D and NFA1000: What distinguishes this combination from all other devices in our range The HFW59D extends the frequency range to REAL 10 GHz. The preamplifier included in the set reduces the display resolution down to 0.01...
Electrosmog measuring kit "Profi plus" MK70-3D plus 2.2
Complete range of equipment for a professional analysis
Adds the following components to the MK70-EW: For the HFE59B: The FF10 frequency filter for a quantitative differentiation of the most widely used radio services. Easy to use with a simple keystroke.*#* In this kit BOTH HF analysers are...
Ask for your INDIVIDUAL i-Set
... the COMPLETE range at a worthwile price point
Are you absolving a building biology training and looking for a customised set for the start of your career? Do you just want to be on the safe side? Are you electrosensitive? Do you have special demands? Whatever - just send us an...
Plastic Transport Case K5
fits one or two devices (with small antenna)
Universal transport case with 2 shaped foam filler inserts, dimensions: approx. 33 x 27 x 8 cm.
Plastic Transport Case K2
fits one HF and one LF device of any type
Universal transport case with shaped foam filler inserts Dimensions: approx. 33 x 27 x 16 cm.
Large Plastic Transport Case K7
For the safe transportation of your equipment
With shaped foam filler inserts. Rugged design for secure storage and transportation of the HF- and LF-Analysers from Gigahertz Solutions, including tailor-made "compartments" for the LogPer antennae and TCO3-probe. Sufficient space...
Shoulder strap for K7 SG_K7
Convenient transport of K7 case - easy mounting
This shoulder strap can easily and quickly be fastened to the existing holder of the case.