No results were found for the filter!
Mounting Aid (ME) PM5
for building a potential free rod
A potential free rod allows for a simple and quick POTENTIAL FREE measurement of electric alternating fields. Can easily be mounted potential free to a wooden rod (e.g. a broomstick, not included!). Made of non-conductive material...
Floating potential equipment holder (NFA) PM1
For a secure placement of your meter
For a potential-free measurement without connection to ground potential Made of FR4 material For the ME or the NFA series Usable with or without holster The display remains clearly visible
Mounting Aid (NFA) PM5s
for building a potential free rod
A potential free rod allows for a simple and quick POTENTIAL FREE measurement of electric alternating fields. Can easily be mounted with the four screws included in delivery onto any wooden rod (preferably hard wood such as beech tree,...
TCO-compliant probe for the NFA series (NFA) TCO3
Suitable for NFA400 and NFA1000
Ideal for the measurement of low exposure electrical installations. Automatic recognition by the NFA400/NFA1000 Allows for E-field measurements againt ground potential, also in areas of difficult access, without the distorting...
Electrostatic Sensor ES-NFA
Designed to be connected to the NFA400/1000
Features: For a measurement of the electrostatic charging of surfaces. A useful aid when choosing material conducive to the indoor environment, such as carpets, curtains, or others For a measurement and control of electrostatic...
Frequency Range: 0 Hz
3D-Magnetostatic Sensor MS3-NFA
Designed to be connected to the NFA400/1000
Features: High-precision one-dimensional measurement of constant magnetic fields Resolution of only 10 nT (therefore even the smallest geomagnetic anomalies can be identified) Switch to select between absolute and relative measurements...
Frequency Range: 0 Hz

Certificate of Calibration KAL-NFA30M
issued specifically for each meter upon request immediately prior to delivery!
For the frequency range from 16 Hz to 32 kHz with detailed calibration protocol. A calibraton certificate required after the purchase of the meter can only be issued after a qualitative functional test of the meter and is subject to an...

Certificate of Calibration KAL-NFA400/1000
issued specifically for each meter upon request immediately prior to delivery!
For the frequencies from 5 Hz to 400 kHz with detailed calibration protocol. Why only up to 400 kHz? Just like the accredited calibration laboratory which does the reference calibrations of the NFA1000 for us, we reach physical limits...
Connecting Cable HF-Analyser to NFA KAB0053
For the connection of an HF analyser to the NFA1000/400/30M
Cable 2.5 mm mono jack to 2.5 mono jack Length 2.0 m Colour black
2in1 Log-Adapter ADA-Y
enables additional logging of 27 MHz through to 10 GHz
Product information „2in1 Log-Adapter ADA-Y“ To avoid overlappings of the frequency bands of the two HF analysers we recommend to use the high-pass filter HP33_G10 with the HFW59D.
Suppression Kit DIY EDY
For signal cables
This kit consists of two ferrite beads which are to be mounted onto the two ends of the cable as shown on the picture, and fixed with the also provided cable straps. An average interference suppression of a factor 100 can be expected....
Battery connecting cable BAK_U
suitable for the HFE59B and the NFA-line
For off-grid, extra-long recordings with any 12V gel- or AGM-battery The cable configuration includes two 20 cm long cables with small crocodile clips for contacting the battery poles, adapted to a suitable plug for our DC socket. Along...
Frequency Separation AC/DC Input FA1
for an in-depth analyisis of Dirty Power
Firmware Activation NFA. Enables long-term recordings of the output signal of an adequate current clamp (for instance CA Miniflex MA200), the TCO probe TCO3 as well as the hand electrode AK2 in the significant frequency categories of...
Silicon holster (protective sheath) yellow (NFA) HOL1
Perfect protection for your valuable meter
for 3D-LF and HF series colour: yellow (delivery without measuring device)