HF-Analyser HF32D
for an easy evaluation of the HF exposure
Even this starter device already combines all common advantages. The reading shows the total pollution without any calculation required. The measured values are reliably displayed directly in the entity corresponding to the building...
Frequency Range: 800 MHz - 2.7 GHz
HF-Analyser HF35C
for an easy HF evaluation, incl. audio analysis
Has the same features and configuration as the HF32D, however additionally offers Audio analyses for the identification of pulsed radiation sources (mobile radio (GSM, UMTS/G3), cordless telephones (DECT), WLAN (Bluetooth), air-traffic...
Frequency Range: 800 MHz - 2.7 GHz
HF-Analyzer HFE35C-basic
for an easy evaluation, incl. acoustic analysis
Designed to allow attachment of the omnidirectional antenna UBB27 for measurements down to 27 MHz. Otherwise features like the HF35C: Audio analyses for the identification of pulsed radiation sources (mobile radio (GSM, UMTS/G3),...
Frequency Range: 800 MHz to 2.7 GHz
HF-Analyser HF38B
The link between amateur and professional instruments
Has the same features and configuration as the HF35C, however additionally offers some important professional features: The log.-per. antenna with further improved frequency response.
A 10 times higher sensitivity: Minimum display...
Frequency Range: 800 MHz - 2.7 GHz (3.3 GHz...
HF-Analyser HF58B
for the professional HF analysis
In addition to the full functionality of the HF38B: A quantitative differentiation between pulsed and un-pulsed radiation - a unique feature within the broadband measuring technology (based on our patent DE10317805)
A NiMH battery, a...
Frequency Range: 800 MHz - 2.7 GHz (3.3 GHz...
HF-Analyser HF58B-r
RADAR-/Crest-optimised version of the HF58B
In addition to the full functionality of the HF58B: A switch for 2 MHz video bandwidth, allowing especially precise measurements, also of ultra short RADAR signals within the frequency range subject to measurement with a minimum pulse...
Frequency Range: 800 MHz - 2.7 GHz (3.3 GHz...
HF-Analyser HF59B
Our first class HF-device
In addition to the full functionality of the HF58B-r: A frequency range of down to 27 MHz within the basic device - suitable for the connection of the optionally available antenna UBB27_G3 (the scope of delivery includes a compensated...
Frequency Range: A frequency range of down...
HF-Analyser kit HFE35C
for an easy evaluation, incl. UBB-antenna
Set offer including the following components: The instrument itself, based on the HF35C but with an extended frequency range reaching down to 27 MHz.
Two antennas: The especially compensated log.-per. antenna for the range above 800...
Frequency Range: 27 MHz - above 2.7 GHz
HF-Analyser kit HFE59B
Our first class HF-device including UBB antenna and accessories
Set offer consisting of the HF59B and a wide range of accessories: Horizontal isotropic ultra broad bandwidth antenna UBB27_G3 from 27 MHz up to beyond 3.3 GHz (limited by the frequency response of the HF59B).
800 MHz high pass filter...
Frequency Range: 27 MHz - above 3.3 GHz
HF-Analyser HFW35C
widens the range of analysis up to 6 GHz
Functionality similar to the HF35C, however: Frequency range from 2.4 to 6 GHz.
A special device suitable for the measurement of radiation caused by wireless applications / computer networks, including the new standards (Bluetooth,...
Frequency Range: 2.4 - 6.0 GHz
HF-Analyser HFW59D
Fully compensated up to 10 GHz
Measures reliably, also within the higher radar frequencies (air traffic control, marine, military radar, weather, traffic supervision): FULL 10 GHz.
Maximum video band width captures even the shortest radar pulses (< 0.5 µs).
Optimized...
Frequency Range: 2.4 - 10.0 GHz
HF-Analyser Set HFW59D plus
Fully compensated up to 10 GHz, incl. HF amplifier and omnidirectional antenna
Measures reliably, also within the higher radar frequency (air traffic control, marine, military, weather, traffic supervision): FULL 10 GHz.
Maximum video band width for the demonstration of the shortest radar pulses (< 0.5 µs)....
Frequency Range: 2.4 - 10.0 GHz
Ultra broad band HF analyser set HFEW35C
For an easy evaluation with extended range of analysis
This set is based on the well established HF Analysers HFE35C and HFW35C.
The frequency response includes radio, TV, TETRA, the usual mobile communication services, DECT, as well as several radar frequencies and new services, such as...
Frequency Range: 27 MHz to 6 GHz
Ultra broad band HF analyser set HFEW59BD plus
For an extensive analysis of 27 MHz to 10 GHz
Based on the professional HF analysers HFE59B and HFW59D plus with the respective accessories. The frequencies covered by this kit contain amateur radio, radio, TV, TETRA, the common mobile radio services, cordless phones, radar...
Frequency Range: 27 MHz to 10 GHz
Service-specific frequency filter FF10
Suitable for all HF analysers
Unmatched: The 40-60 dB suppression of unwanted frequencies as well as the 20-30 dB suppression for the technically very difficult separation between GSM/LTE1800 and DECT.
To be connected between the antenna cable and the antenna entry...
Frequency Range: (Here: filter positions)...
Attenuator DG20
suitable for: HF32D, HF35C, HF38B
For high exposures Reduces the sensitivity of the measuring device by a factor of 100 (= 20 dB).
Adaptor plug to be connected to the antenna input socket.
Attenuator with DC-Bypass DG20_G10
suitable for: all HF5xx as well as all E- and W-types
Like DG20 but with enhanced frequency linearity and DC-bypass.
RF-preamplifier HV10_27G3
suitable for: HF58B, HF59B, HFE59B
Future-proof: Comprises the full frequency range of the HF59B.
In order to avoid measurement errors due to intermodulations, a high pass filter matching to the antenna (such as the HP800) should be applied when measuring with the...
High-pass filter HP800_G3
suitable for: HFE35C, HF59B, HFE59B
This filter helps suppress the lower frequencies. It reaches an attenuation of more than 50 dB (= factor 100,000) below 600 MHz.
All Gigahertz analysers specified above 800 MHz already come with a similar filter integrated in the basic...
Ultra broadband antenna for RF-Analysers UBB27_G3
suitable for: HFE35C, HF59B, HFE59B
From 27 MHz to beyond 3.3 GHz*: For the measurement of the primary high frequency ranges: CB and amateur radio, directional radio, TV and radio (digital and analogue), TETRA, GSM, radar, DECT, UMTS, WLAN, and more.
"Overall...
Frequency Range: 27 MHz to beyond 3.3 GHz.
Omnidirectional Antenna UBB2410
Revision 2.0 - Suitable for: HFW35C, HFW59D
Horizontally-isotropic 360°-reception pattern - fundamental for long-term measurement recordings
Advantageous especially for the identification of radar signals with an unknown location of the transmitter
For both wireless LAN bands,...
Frequency Range: 2.4 GHz - 10 GHz
Quasi isotropic ultra broadband antenna UBB27-SA3
suitable for: spectrum analysers
UBB27_G3 incl. accessories designed for measurements with spectrum analysers_G3. DC input element, antenna mounted on plastic housing, including adapters and antenna cablel
Frequency Range: 27 MHz to beyond 3.3 GHz.
Silicon holster (protective sheath) black HOL2
Perfect protection for your valuable meter
for 3D LF and HF series
colour: black
(delivery without measuring device)
Low Frequency Analyser ME3030B
for an easy evaluation of LF-exposure
Even this starter device already comprises all common advantages - the only one of ist kind in this price category. The reading shows the total pollution without any calculation required. The measured values are reliably displayed...
Frequency Range: 16 Hz - 2 KHz (compensated,...
Low Frequency Analyser ME3830B
for an easy evaluation of LF-exposure
Comprises all features of the ME3030B, and additionally offers: A clearly extended frequency range: from 16 Hertz to 100 Kilohertz. This frequency range (in accordance with SBM) also includes the higher frequencies caused by, for...
Frequency Range: 16 Hz - 100 KHz...
Low frequency analyser ME3840B
The link between amateur and professional instruments
Comprises all features of the ME3830B, and additionally offers: A switchable internal filter module as in the professional devices, allowing a numeric differentiation of traction power and mains supply as well as the artificial higher...
Frequency Range: 5 Hz - 100 KHz...
Low Frequency Analyser ME3851A
compact and professional
Comprises all features of the ME3840B, and additionally offers: Responsivity increased by a factor of 10 (minimum display resolution: 0.1 V/m / 0.1 nT).
NiMH battery, battery charger / power supply unit included.
An AC- and a...
Frequency Range: 5 Hz - 100 KHz...
Low Frequency Analyser ME3951A
compact and professional
Comprises all features of the ME3851A, and additionally offers: An extended frequency range from 5 Hertz to 400 Kilohertz, in accordance with the TCO guidelines. An important decision criterion when offering professional LF measurements.
Frequency Range: 5 Hz - 400 KHz...
Mounting Aid (ME) PM5
for building a potential free rod
A potential free rod allows for a simple and quick POTENTIAL FREE measurement of electric alternating fields.
Can easily be mounted potential free to a wooden rod (e.g. a broomstick, not included!).
Made of non-conductive material...
Allows measurement of the electrostatic charge of, for instance, monitors, carpetings, curtains, etc.. These electrostatic charges have a significant influence on the room air quality (air ionization) and are therefore an important...
Frequency Range: 2000 V / 20 kV
Including hand electrode and grounding cable. To be used for the measurement of the capacitive body voltage in accordance with the standard guidelines of the building biology measurement technology (SBM). A useful supplement for field...
To control the appropriate phase connections of electric appliances.
3D-LF-Analyser with Data Logger NFA1000
our masterpiece - for a thorough and in-depth analysis!
Exclusive highlights in addition to the 3D magnetic field measurement THREE-dimensional potential-free measurement of the electric field - without additional "cube" - making the impossible possible thanks to our patents DE102008045360...
Frequency Range: 5 Hz to 1000 KHz...
3D-LF-Analyser with Data Logger NFA400
for an in-depth analysis
In addition to the three-dimensional magnetic field measurement: ONE-dimensional potential-free measurement of the electric field (Y-axis). Non-isolated electric field measurement possible with integrated sensor or with the optionally...
Frequency Range: 5 Hz to 400 kHz...
3D-Magnetic Field Data Logger NFA30M
for an in-depth analysis of the magnetic field
Comprises all common technical parameters of the NFA series Allows longterm measurements of the magnetic field as required in the guidelines for sleeping place measurements.
Please have a look at the data sheet (to be found under...
Frequency Range: 16 Hz to 32 KHz (compensated)
PC Software NFAsoft
for the NFA series
Revolutionizes the evaluation of individual measurements and long term recordings. Included in the NFA scope of supply.
No installation required. Can be run with all systems as of Windows 98, with Linux, and with MAC. The software is...
TCO-compliant probe for the NFA series (NFA) TCO3
Suitable for NFA400 and NFA1000
Ideal for the measurement of low exposure electrical installations.
Automatic recognition by the NFA400/NFA1000
Allows for E-field measurements againt ground potential, also in areas of difficult access, without the distorting...
Electrostatic Sensor ES-NFA
Designed to be connected to the NFA400/1000
Features: For a measurement of the electrostatic charging of surfaces. A useful aid when choosing material conducive to the indoor environment, such as carpets, curtains, or others
For a measurement and control of electrostatic...
Frequency Range: 0 Hz
3D-Magnetostatic Sensor MS3-NFA
Designed to be connected to the NFA400/1000
Features: High-precision one-dimensional measurement of constant magnetic fields
Resolution of only 10 nT (therefore even the smallest geomagnetic anomalies can be identified)
Switch to select between absolute and relative measurements...
Frequency Range: 0 Hz
Accessory Kit Body Voltage NFA1000
Floating potential equipment holder (NFA) PM1
For a secure placement of your meter
For a potential-free measurement without connection to ground potential
Made of FR4 material
For the ME or the NFA series
Usable with or without holster
The display remains clearly visible
Mounting Aid (NFA) PM5s
for building a potential free rod
A potential free rod allows for a simple and quick POTENTIAL FREE measurement of electric alternating fields.
Can easily be mounted with the four screws included in delivery onto any wooden rod (preferably hard wood such as beech tree,...
Certificate of Calibration KAL-NFA30M
issued specifically for each meter upon request immediately prior to delivery!
For the frequency range from 16 Hz to 32 kHz with detailed calibration protocol.
A calibraton certificate required after the purchase of the meter can only be issued after a qualitative functional test of the meter and is subject to an...
Certificate of Calibration KAL-NFA400/1000
issued specifically for each meter upon request immediately prior to delivery!
For the frequencies from 5 Hz to 400 kHz with detailed calibration protocol. Why only up to 400 kHz? Just like the accredited calibration laboratory which does the reference calibrations of the NFA1000 for us, we reach physical limits...
Silicon holster (protective sheath) yellow (NFA) HOL1
Perfect protection for your valuable meter
for 3D-LF and HF series
colour: yellow
(delivery without measuring device)
Connecting Cable HF-Analyser to NFA KAB0053
For connecting an HF analyser to an NFA meter
Cable 2.5 mm mono jack to 2.5 mono jack
Length 2.0 m
Colour black
Electrosmog measuring kit MK10
for an easy evaluation of your personal exposure
This solid basic equipment, consisting of an HF32D and an ME3030B, allows for a reliable interpretation of the personal exposure to HF and LF electrosmog on the basis of acknowledged measurement procedures. For detailed specifications...
Electrosmog measuring kit MK20
for an easy evaluation of your personal exposure
Contains the instruments ME3830B and HF35C.
Allows an easy evaluation of the personal exposure to HF and LF electrosmog according to the guidelines and recommended safe values of the "Standard of Building Biology Measuring Techniques"...
Electrosmog measuring kit MK30
The link between the amateur and the professional instruments
The devices contained in this measuring kit are a perfect combination of the easily operated devices for technical amateurs with the additional analytical possibilities offered by the devices for professional evaluations. This is the...
Electrosmog 3D measuring kit "Profi" MK60-3D
for the professional analysis
For professionals for the analysis of HF and LF The professional equipment for building biologists for the high and low frequency. The NFA400 allows for a frequency range extended to the full TCO band width within the low frequency and...
€2,248.49
(€125.00 saved)
price outside EU: €1,889.49
plus local taxes
plus shipment
Electrosmog measuring kit "Profi" MK70-3D
Our top meters for a professional analysis
The kit containing our two top models, the NFA1000 and the HFE59B This set consists of our two top models, the NFA1000 and the HFE59B. The quasiisotropic antenna of the HF-device has special advantages for the building biology immission...
€3,695.00
(€209.00 saved)
price outside EU: €3,105.04
plus local taxes
plus shipment
Electrosmog measuring kit "Profi plus" MK70-3D plus 2.2
Complete range of equipment for a professional analysis
MK70-3D plus: The MK70-3D with the following additional devices:
HFW59D (2.4 - 10 GHz) incl. HV20 and UBB2410
TCO3 probe for the NFA1000
PM1 potential-free holder
Capacious plastic transport case
5% discount on any supplementary...
€5,980.00
(€800.00 saved)
price outside EU: €5,025.21
plus local taxes
plus shipment
Ask for your INDIVIDUAL i-Set
... the COMPLETE range at a worthwile price point
Are you absolving a building biology training and looking for a customised set for the start of your career?
Do you just want to be on the safe side?
Are you electrosensitive?
Do you have special demands?
Whatever - just send us an...
Plastic Transport Case K5
fits one or two devices (with small antenna)
Universal transport case with 2 shaped foam filler inserts, dimensions: approx. 33 x 27 x 8 cm.
Plastic Transport Case K2
fits one HF and one LF device of any type
Universal transport case with shaped foam filler inserts
Dimensions: approx. 33 x 27 x 16 cm.
Large Plastic Transport Case K6
For the safe transportation of your equipment
With shaped foam filler inserts.
Rugged design for secure storage and transportation of the HF- and LF-Analysers from Gigahertz Solutions, including tailor-made "compartments" for the LogPer antennae and TCO3-probe.
Sufficient space...