No results were found for the filter!
ME3030B
Low Frequency Analyser ME3030B
Reliable EMF evaluation for your home
Even this starter device meets the high quality standards and common advantages of whole series: The reading shows the total pollution directly in the entity corresponding to the building biology standard values - without any...

Frequency Range: 16 Hz - 2 KHz (compensated,...

€149.50

incl. local taxes
plus shipment
price outside EU: €125.63

ME3830B
Low Frequency Analyser ME3830B
unlocks the 100 kHz as specified by SBM
Comprises all features of the ME3030B, and additionally offers: Comprises the full frequency response required by the standard of building biology: 16 Hz to 100 kHz. And it is - unique in this price range - fully compensated up to 100...

Frequency Range: 16 Hz - 100 KHz...

€229.50

incl. local taxes
plus shipment
price outside EU: €192.86

ME3840B
Low frequency analyser ME3840B
The link between amateur and professional instruments
On top of all features of the ME3830B, it offers: The switchable internal filter module is included as in the professional devices. This allows for a numeric differentiation of the different sources of EMF pollution like Dirty Power,...

Frequency Range: 5 Hz - 100 KHz...

€297.50

incl. local taxes
plus shipment
price outside EU: €250.00

ME3851A
Low Frequency Analyser ME3851A
compact and professional
It’s the professional features that differentiate the ME3851A from the ME3840B Very important: It is more sensitive by a factor of 10 (smallest display resolution: 0.1 nT / 0.1 V/m). In conjunction with the frequency filter even the...

Frequency Range: 5 Hz - 100 KHz...

€399.60

incl. local taxes
plus shipment
price outside EU: €335.80

ME3951A
Low Frequency Analyser ME3951A
compact and professional
Main difference to the ME3851A: The frequency response is extended to the full 400 kHz, as specified in the TCO directive. This is an important decision criterion, if you offer professional LF measurements, because ... modern switching...

Frequency Range: 5 Hz - 400 KHz...

€565.25

incl. local taxes
plus shipment
price outside EU: €475.00

PM5
Mounting Aid (ME) PM5
for building a potential free rod
A potential free rod allows for a simple and quick POTENTIAL FREE measurement of electric alternating fields. Can easily be mounted potential free to a wooden rod (e.g. a broomstick, not included!). Made of non-conductive material...
€9.70

incl. local taxes
plus shipment
price outside EU: €8.15

STS1
Allows measurement of the electrostatic charge of, for instance, monitors, carpetings, curtains, etc.. These electrostatic charges have a significant influence on the room air quality (air ionization) and are therefore an important...

Frequency Range: 2000 V / 20 kV

€461.72

incl. local taxes
plus shipment
price outside EU: €388.00

DMM3-Set
Including hand electrode and grounding cable. Suitable for measurements of the capacitive body voltage following the standard guidelines of the buiding biology measurement technology (SBM). A useful supplement for field strength...
€122.45

incl. local taxes
plus shipment
price outside EU: €102.90

MFP
To control the appropriate phase connections of electric appliances.
€5.95

incl. local taxes
plus shipment
price outside EU: €5.00

ERDK
5 Meter Erdungskabel
€5.30

incl. local taxes
plus shipment
price outside EU: €4.45

ERDK2

€11.60

incl. local taxes
plus shipment
price outside EU: €9.75

NFA1000
3D-LF-Analyser with Data Logger NFA1000
established as “Gold Standard” for EMF professionals
The NFA1000 supports EMF professionals with dedicated innovative features THREE-dimensional potential-free measurement of the electric field - without the necessity of an external cubicle sensor (thanks to our patents DE102008045360 and...

Frequency Range: 5 Hz to 1000 KHz...

€1,933.75

incl. local taxes
plus shipment
price outside EU: €1,625.00

NFA400
3D-LF-Analyser with Data Logger NFA400
for an in-depth EMF analysis
In addition to the three-dimensional magnetic field measurement with its compact internal sensor, the NFA400 features the following: The frequency response is extended from 5 Hz up to 400 kHz (TCO). ONE-dimensional potential-free...

Frequency Range: 5 Hz to 400 kHz...

€1,594.60

incl. local taxes
plus shipment
price outside EU: €1,340.00

NFA30M
3D-Magnetic Field Data Logger NFA30M
for comprehensive long-term analysis of the magnetic field
Revolutionizes the significance of long-term magnetic field recordings: Parallel to the true 3D value of the magnetic field in the entire frequency range, the three axes of the field, railway and mains current as well as natural and...

Frequency Range: 16 Hz to 32 KHz (compensated)

€1,285.20

incl. local taxes
plus shipment
price outside EU: €1,080.00

NFAsoft
PC Software NFAsoft
for the NFA series
Revolutionizes the evaluation of individual measurements and long term recordings. Included in the NFA scope of supply. No installation required. Can be run with all systems as of Windows 98, with Linux, and with MAC. The software is...
€0.00

incl. local taxes
plus shipment
price outside EU: €0.00

FA1
Frequency Separation AC/DC Input FA1
for an in-depth analyisis of Dirty Power
Firmware Activation NFA. Enables long-term recordings of the output signal of an adequate current clamp (for instance CA Miniflex MA200) in the significant frequency categories of the NFA meters. The recorded data can be visualized and...
€178.50

incl. local taxes
plus shipment
price outside EU: €150.00

TCO3
Ideal for the measurement of low exposure electrical installations. Automatic recognition by the NFA400/NFA1000 Allows for E-field measurements againt ground potential, also in areas of difficult access, without the distorting...
€259.90

incl. local taxes
plus shipment
price outside EU: €218.40

ES-NFA
Electrostatic Sensor ES-NFA
Designed to be connected to the NFA400/1000
Features: For a measurement of the electrostatic charging of surfaces. A useful aid when choosing material conducive to the indoor environment, such as carpets, curtains, or others For a measurement and control of electrostatic...

Frequency Range: 0 Hz

€295.00

incl. local taxes
plus shipment
price outside EU: €247.90

MS3-NFA
3D-Magnetostatic Sensor MS3-NFA
Designed to be connected to the NFA400/1000
Features: High-precision one-dimensional measurement of constant magnetic fields Resolution of only 10 nT (therefore even the smallest geomagnetic anomalies can be identified) Switch to select between absolute and relative measurements...

Frequency Range: 0 Hz

€468.50

incl. local taxes
plus shipment
price outside EU: €393.70

AK2
Accessory Kit Body Voltage NFA1000/400
€36.00

incl. local taxes
plus shipment
price outside EU: €30.25

PM1
Floating potential equipment holder (NFA) PM1
For a secure placement of your meter
For a potential-free measurement without connection to ground potential Made of FR4 material For the ME or the NFA series Usable with or without holster The display remains clearly visible
€57.00

incl. local taxes
plus shipment
price outside EU: €47.90

PM5s
Mounting Aid (NFA) PM5s
for building a potential free rod
A potential free rod allows for a simple and quick POTENTIAL FREE measurement of electric alternating fields. Can easily be mounted with the four screws included in delivery onto any wooden rod (preferably hard wood such as beech tree,...
€18.50

incl. local taxes
plus shipment
price outside EU: €15.55

KAL-NFA30M
Certificate of Calibration KAL-NFA30M
issued specifically for each meter upon request immediately prior to delivery!
For the frequency range from 16 Hz to 32 kHz with detailed calibration protocol. A calibraton certificate required after the purchase of the meter can only be issued after a qualitative functional test of the meter and is subject to an...
€130.90

incl. local taxes
plus shipment
price outside EU: €110.00

KAL-NFA400/1000
Certificate of Calibration KAL-NFA400/1000
issued specifically for each meter upon request immediately prior to delivery!
For the frequencies from 5 Hz to 400 kHz with detailed calibration protocol. Why only up to 400 kHz? Just like the accredited calibration laboratory which does the reference calibrations of the NFA1000 for us, we reach physical limits...
€261.80

incl. local taxes
plus shipment
price outside EU: €220.00

HOL1
Silicon holster (protective sheath) yellow (NFA) HOL1
Perfect protection for your valuable meter
for 3D-LF and HF series colour: yellow (delivery without measuring device)
€27.97

incl. local taxes
plus shipment
price outside EU: €23.50

KAB0053
Connecting Cable HF-Analyser to NFA KAB0053
For the connection of an HF analyser to the NFA1000/400/30M
Cable 2.5 mm mono jack to 2.5 mono jack Length 2.0 m Colour black
€9.95

incl. local taxes
plus shipment
price outside EU: €8.36

EDY
Suppression Kit DIY EDY
For signal cables
This kit consists of two ferrite beads which are to be mounted onto the two ends of the cable as shown on the picture, and fixed with the also provided cable straps. An average interference suppression of a factor 100 can be expected....
€8.95

incl. local taxes
plus shipment
price outside EU: €7.52

BAK_U
Battery connecting cable BAK_U
suitable for the HFE59B and the NFA-line
For off-grid, extra-long recordings with any 12V gel- or AGM-battery The cable configuration includes two 20 cm long cables with small crocodile clips for contacting the battery poles, adapted to a suitable plug for our DC socket. Along...
€26.30

incl. local taxes
plus shipment
price outside EU: €22.10